Johns Creek is about as new as metro Atlanta gets — roughly seven in ten homes built since 1990 and barely one in a hundred before 1960. In practice that means nearly every fireplace we open here is factory-built. If somebody quotes you masonry repairs in Johns Creek, it is worth asking what exactly they looked at.
Tell us about your fireplace and we’ll call to confirm a time and give you a free quote.
We’ve got your details and will call you shortly with a free quote for your chimney.
Call us now: (470) 486-7009No trip fee and no charge for the inspection, whether or not you go ahead. You get a flat written price before any work starts.
About 7 in 10 homes in Johns Creek have been built since 1990 (U.S. Census, 2020–2024), and that single fact decides what is likely wrong with yours.
A factory-built fireplace is a tested, listed unit with a model number on a data plate. It is serviced to the manufacturer specification, not by a mason, and the parts are matched to the model. We read the plate first, every time.
Water getting past a rusted or badly fitted chase cover is the single most common fault we find on these houses. It runs down inside the chase, out of sight, onto the framing. Catching it is cheap. Finding it through the ceiling is not.
Cracked refractory panels, perished door gaskets and a missing storm collar are the rest of the list. All replaceable, all model-specific, and none of them repairable with mortar.
If you have never had the chase cover and firebox properly looked at, that is the visit to book. Free, and you get the written price before anything happens.
Also useful: how we sweep a chimney and everything we repair.
One visit covers the full flue, the firebox and everything on the roof — and you get a written free quote for any repair we find.
Chimney work isn’t one-size-fits-all. A single-storey flue that gets used twice a winter is a different job from a two-storey stack with a season of creosote on it.
So rather than advertise a number that changes the moment we arrive, we look at your actual chimney and give you a free estimate in writing — then you decide.
Most chimney problems start small and cheap. Left alone through a few Georgia winters, they stop being either.
The concrete slab on top takes the weather first. Hairline cracks let water in, and freeze-thaw cycles widen them until the masonry starts coming apart. We reseal before that happens.
A missing or rusted-through cap is an open invitation for rain, leaves, squirrels and birds. A new stainless cap keeps all of it out and lasts for years.
The liner is what keeps heat and combustion gases inside the flue instead of in your walls. If we find cracks or gaps, we'll show you and explain the options plainly.
Crowns, caps and flues on real Atlanta homes — no stock photos, no filters.
← Swipe to browse →
Most sweeps are finished inside 90 minutes.
Fill in the form or call us. We'll confirm a slot that suits you — often same or next day.
We seal the hearth, sweep the full flue, then check the crown, cap, liner and draft. You see whatever we find.
You get a clean chimney and a written free quote for any repair — no pressure to book it there and then.
We cover 52 cities across metro Atlanta. Every sweep starts with a free estimate, and anything we find comes back to you as a written quote — before a single repair begins.
If you’ve been looking for a chimney sweep near you in metro Atlanta, you’ve found a local one. We’re based here, our crews live here, and we cover 52 cities across the metro — from Woodstock and Kennesaw in the north down to Fayetteville, McDonough and Covington in the south.
Don’t see your town below? Give us a call — if you’re in the metro, we almost certainly cover you.
The things people ask us most before booking.
Because in Johns Creek it very rarely is. The overwhelming majority of homes here went up from the nineties on, and the standard build is a steel firebox and insulated metal flue inside a framed chase, often finished with brick veneer. It looks like a chimney from the street and it is a different appliance on the roof. We confirm which before quoting.
Yes, if you burn wood in it. It builds creosote the same way masonry does, and the metal flue has less thermal mass, so deposits form readily. It is swept differently and inspected differently — we are checking panels, gaskets and the chase cover as well as the flue — but the once-a-year rule is the same.
It depends on the height of the chimney, the type of flue and how much creosote has built up since the last sweep. That's why we start with a free estimate — we look at your actual chimney and give you a flat written price before any work starts. No trip fee, no surprises.
Once a year if you use your fireplace regularly, and always before the first burn of the season. Even a lightly used chimney should be inspected annually — animals nest in open flues over summer, and crown cracks don't announce themselves.
No. We seal off the fireplace opening and run our vacuum the whole time we work, so the soot goes into our equipment rather than onto your floor. We leave the hearth cleaner than we found it.
We cover all of metro Atlanta and the surrounding suburbs — from Woodstock and Kennesaw in the north to Fayetteville, McDonough and Covington in the south. Enter your address in the form and we'll confirm availability when we call.
One visit. A clean flue, an honest inspection, and a written estimate you’re under no obligation to accept.
